How to buy second-hand shoes in bulk and grade them yourself

Matched pairs, soles and heels, insoles, linings and sizes, how to sort shoes into your own sale grades, and whether to take shoes inside clothing lots or as separate lots.

By UK Clothing Ltd. Published 22 November 2026

Shoes carry more ways to fail than clothing. Two pieces have to match, the sole has to hold, and the inside has to be fit to wear. A lot that looks fine on a table can hide a bad detail in many of its pairs.

Pairs come first

A single shoe is worth nothing at the counter. Before anything else, ask how the lot is packed. Pairs may be tied or clipped together, or they may arrive loose, and loose shoes in a bag are the hardest to match later. State in your enquiry that you want pairs kept together, and ask the supplier to say what share of the lot is paired.

Check that both shoes are the same size, the same style and the same colour. Left and right shoes of look-alike models, one with a different lace or sole pattern, are a common mismatch. Tip a mixed pile onto a table and sort pairs first. Judge the rest afterwards.

Soles and heels

Turn every shoe over. Soles tell the story of how a pair was used, and they cannot be repaired cheaply in a shop. Look at the heel edge on the outside, where wear slopes the heel, and at the ball of the foot, where thinning or cracks begin. For boots, look at the tread depth and whether the sole edge has started to lift from the upper.

Bend the shoe at the ball of the foot. A sole that cracks or crumbles is finished, whatever the upper looks like. Rubber that has gone hard and shiny has lost its grip. Heels on dress shoes may have worn tips: if the metal shows, the shoe fails.

Inside the shoe

The inside decides whether anyone will buy a pair. Take out the insole if it lifts and look at the footbed beneath. A deep dent, a collapsed arch or a dark stain is a sign of heavy use. Check linings for holes at the heel, where the foot rubs, and look at the toe box for cracks.

Hygiene is a rule of its own. Smell cannot be shown on video, so write your requirement into the terms: the shoes should be dry, free of mould and free of strong odour, and ask how non-compliant pairs are handled. Clean what is salvageable before display, and set aside what is not.

Sizes and fit

Sizes on shoes vary by label and by country. Look for a size marking inside the tongue or on the sole, and check a few pairs against a foot gauge or a template to see whether the marking matches the length. Ask what size system the lot uses and whether children's pairs are mixed in with adult ones.

Ask for the size range in the written description. A lot made mostly of the middle sizes sells differently from one with a wide spread, and you can plan your rails accordingly.

Sorting your own sale grades

Do not leave grading to chance. Decide your own scale before the lot arrives, and write down what each grade means. A simple one has three levels.

  1. Ready to sell after a wipe: even soles, sound linings, clean insoles
  2. Sell at a lower price after cleaning or a new insole
  3. Reject or recycle: broken soles, torn linings, mould, shoes without a partner

Count each grade in the first bale or bag and compare the result with what was promised in the description. That sample also gives you a record to show the supplier if the lot proves to be below what was agreed.

Shoes inside clothing lots or in separate lots

Some second-hand lots mix footwear with garments, while others are shoes only. Ask in your enquiry whether any shoes are included in a clothing lot you are considering, and in what proportion. The original collection page describes the clothing lines, and the shoes catalog lists the footwear types.

A mixed lot is convenient if you want a few shoes alongside clothing, but you have less control over size and style. A separate shoe lot lets you choose the type and ask for pairing, and it makes your sorting cleaner because the shoes arrive on their own.

The UK Trade Tariff treats worn footwear and worn clothing in the same heading, 6309, provided the goods show appreciable wear and are presented in bulk or in bales, sacks or similar packings. That does not decide how a supplier packs them, so ask.

Where to start

If shoes are new to your shop, ask whether a small first lot is possible.

The catalog has separate pages for the three footwear types: slippers, trekking shoes and other used shoes. Photos and video help most with shoes, so read the guide to checking a lot before shipping and then write through the contact page.

Questions about buying shoes in bulk

How should pairs be packed in a bulk lot?

Ask for pairs tied or clipped together, and for the written terms to state what share of the lot is paired. Loose shoes in a bag take far longer to match and some will never find a partner.

Can I see the soles before I agree?

Yes, you can ask for photos or a short video of the lot before confirming. Request close shots of soles and insoles from a sample, plus a few pairs bent at the ball of the foot.

Should I buy shoes inside a clothing lot or separately?

Separate lots give you more control over what you receive. Mixed lots are simpler to order, but you accept whatever shoes come with the clothing. Ask what proportion is included before you decide.

Send us your enquiry

Tell us the category, the quantity you have in mind and where the goods should go. We reply with the terms for that order.